Nellies Glen Lookout

Couple of months ago, on a Sunday afternoon, we went for a short drive up to the Blue Mountains and somehow we ended up at a location known as Nellie's Glen. The place is very close to where Explorer's Tree is found, just before you enter Medlow Bath and where one also finds the beginning of the six foot track. The day was warm but cloudy with the occasional shower and thunderstorms, just a typical summer afternoon.What inspired me in the scenery was the intermittent light coming from the broken clouds, especially the warm afternoon light.
 

Materials used:

• 45 x 90 cm stretched 10 oz cotton canvas
• Brushes: Flat 10 - 12 for underpainting. A selection of long flats, 4,6,8 and long filberts 2 & 4
• Oil paints (Art Spectrum, Landgridge, Norma), liquol for underpainting, Langridge Oleogel:

Titanium/zinc white, sap green, Burnt sienna, Australian red gold, Australian grey, raw and burnt umber
Blues: Ultramarine Blue, Cobalt blue, Manganese Blue
Reds: Permanent alizarin, Pilbara red, Vermilion, Indian red
Yellows: Lemon Yellow, cadmium yellow light,  cadmium yellow medium, cadmium orange, yellow ochre

Under-painting (Blocking in)

First I sketched briefly the outline of the main shapes in the painting. From the photos that I had as reference I completely changed the foreground of the painting by adding two trees one on each side of the painting. Using a very diluted wash with liquol the main shapes were blocked in. Liquol (Art Spectrum) is similar to liquin and helps the paint to dry very quickly.

Blocking in the main composition

The next step was to start establishing the form and light. As shown in the picture above initially I was going to place the light source as if it is coming from the right hand side (as seen by the highlights on the right front tree). However I changed the direction of the light later on to the middle part. Since the sky was pretty much grey and cloudy it was very difficult to see where the sun was. I also started adding some clouds using a mixture of ultramarine blue, permanent alizarin and raw umber. At this stage I use big flat brushes to quickly cover the canvas and avoid the temptation of fiddling too much. I also found that the colors I used initially for the underpainting were a little bit too light and so I darkened the overall picture, with the exception of where I wanted the highlights.

Establishing form and light

Mid- and fore-ground
Now the real work and fun started...adding the details. I wanted this painting to have lots of details, after all I love detail. From here on wards I used smaller brushes usually very long small filberts (Art Spectrum series 1100 brushes). These brushes are excellent, they keep their shape and they are relatively soft making it easy to apply layers of colors by softly touching the canvas. I started using the gel medium from Langridge, which gives more texture to the paint while at the same time makes the paint flow easier on the canvas. The rock formations on the right hand side were painted using a painting knife and a mixture of Pilbara red, ultramarine blue, vermilion and burnt sienna.
Cliff faces of distant mountains were painted using white and Pilbara red (tinted with more white for the most distant ones). Yellow was added to highlight objects directly hit by sun while for objects lit by day light, white was added to the base color.
As in any other painting, distant objects are less defined, lighter and cooler (more blue added) when compared to the ones closer to us. Nearby objects are well defined, darker and warmer.
I also used what is known as negative painting to define better objects like the front tree on the left. Using a slightly darker version of the sky (or background) colour, I painted over parts of the foliage to open up space and define more branches.

The finished painting

 

Painting Blue Mountains

I did this painting from a photo taken at a location in Blue Mountains.

Colours used:

Cerulean Blue, Cobalt blue, Ultramarine Blue, lemon yellow, cad yellow light, yellow ochre, burnt sienna, burnt umber, rose madder genuine, alizarin crimson, titanium/zinc white, vermilion, viridian, Australian red gold.

I started with the underpainting, where I used pure gum turps to dilute the paints.

I mixed first grey by mixing equal amounts of cobalt blue and white, rose madder and touch of lemon yellow. From the darker colour I also mixed two tints. 

Using a mixture of burnt umber and ultramarine blue I blocked in the rock on the left while the front grasses on the right and foliage were blocked using a dark mix of burnt sienna and viridian. 

Another grey (ultramarine blue with some white, vermilion and touch of yellow ochre) was used for the tree trunks. 

I then blocked in the background using the first grey starting from the darkest color and using the lighter tints for the more distant cliffs.

The sky was done using various combinations of lemon yellow with white to the areas from where light is coming and a mixture of cerulean blue and touch of alizarin to the left hand side area.

I left the painting to dry a little bit for around an hour, since I used turps the paints will dry quickly and becomes tacky. 

The I started from the back adding details and highlights. I used a mix of white with lemon yellow and madder, from which I prepared two tints. The lightest tint was used for the background grasses on the top of the cliffs, getting darker as I move forward.

Using a palette knife  and the same colours I added the trees in the background on the side of the cliffs. The distant trees where blended using a mop brush to soften the edges. 

Using the darkest background colour, and by adding some white to it, with a horizontal brushstroke I added the cliff faces in the shadowy area of the closest cliffs.

The other cliffs were added using a mixture of white and rose madder.

Highlights and more details to front trees were added using cad yellow light/viridian and for the foliage shadow burnt sienna/viridian with alizarin.

Highlights on teh front tree trunks where added using a mix of white with cad orange.

The lighter part of the rocks were added using various mixtures of yellow ochre, alizarin, ultramarine blue and burnt sienna.

Oil painting - Near Warrenbungles

This is an oil on canvas I finished a week ago. The original photo was taken while on my way to Lightning Ridge and I was driving on a road crossing through the Warrenbungles National Park. 

The sky was painted using titanium white and raw sienna for the lower part and cerulean blue for the top and closer sky.

A mix of cobalt blue and permanent rose was used as an underpainting for the mountains (adding more titanium white to the distant mountain). The same mix was used to under-paint the mid-ground. Underpainting of the mid-ground trees was done using a darker mix by adding more cobalt blue and rose. The underpaint of the front three and ground was painted using a mix of ultramarine blue and burnt sienna.

Highlights on the mountain were done by adding white to the underpaint plus addition of lemon yellow for the side facing the sun. The same was done for the highlights on the trees to which I added raw sienna and cadmium orange.

The ground in the distance was painted using a flat brush and horizontal brush strokes with white, cadmium orange, lemon yellow and a touch of viridian.

As moving towards the foreground more viridian and yellow ochre were added for the ground. The grass at the front was painted witha painting knife using cadmium yellow, viridan and Australian red gold.

Highlights on the front tree were painted with cadmium yellow mixes with ultramarine blue and white. Details such as house and cows were added later on.

Hanging Rock

This is an oil painting of hanging rock in Blue Mountains National Park.

I used two sets of colours, pallette 1 for the background and pallette 2 for the foreground.

Pallette 1: Titanium White, Cobalt blue, permanent crimson, raw sienna, manganese blue.

Pallette 2: Pilbara red, ultramarine blue, burnt sienna, Payne's grey, cadmium yellow medium

Step 1

Step 1

First I did a basic sketch using willow charcoal. Using a very diluted mixture of colour in odourless spirit, the upper part of the sky was painted with manganese blue and titanium white. Raw sienna was used for the yellowish part of the sky. An underpainting of the background mountains was done using cobalt blue and white, adding more blue and permanent crimson as I moved forward.

Step 2

Step 2

I blocked the main rock using a wash of burnt sienna and Payne's grey for the darkest shadows. I left the painting to dry overnight.

Step 3

Step 3

During this stage I add more detail and mid-tone colours. Clouds where painted using a mix of cobalt blue and crimson with white. The background cliffs where painted using white with a touch of cobalt blue and permanent crimson for the furthest ones. As I moved forward I eliminated the blue and added more crimson and also a touch of burnt sienna to the closest cliffs. 

Grass on the furthest cliffs was painted using raw sienna, white and a touch of sap green. The trees become greener as they come closer. 

The main rock formation was further developed using ultramarine blue, burnt sienna and Payne's grey.

Trees on the rock formation were blocked using ultramarine blue/vermillion, tinting it with white as moving backwards.

Step 4:

Step 4

More details and highlighting were added. At this stage I usually start from the main subject and then move to the less important parts and background. Pilbara red, cad yellow and vermillion were used for the main rock, creating texture using a painting knife. Highlights on the rock were done using white and Australian red gold. I then added highlights to the trees using cadmium yellow and Australian red gold, adding white as I moved to the background.