Last Lights on Tumut Valley

Step 1 This is one of the most recent paintings showing Tumut Valley in NSW. What attracted me to paint this scenery was the game of warm light and shadows through the whole view. The linen board was primed for oil painting and underpainted with a tint ultramarine blue and burnt umber. Materials used: 60 x 30cm linen board Brushes: Long Flat brushes 12, 10, 8, 4, 2 liners (0, 00), Very long filberts (2, 6) (Art Spectrum Series 1100KLF) Odourless mineral spirit +  Liquol (Art Spectrum) Color palette: Titanium and zinc white, French Ultramarine Blue, permanent alizarin, viridian, sap green, burnt sienna, raw sienna, , raw umber, Flinders red violet, Australian red gold (Art Spectrum), Cobalt blue deep, yellow ochre (Norma Professional), Van Dyke brown, ultramarine rose, cadmium yellow light, medium, deep (Masterclass), cadmium orange (Old Holland) and lemon yellow (Michael Harding)

Under-painting (Blocking in) I wanted to start off this painting over a very dark underpainting, so using a number 12 flat brush I blocked in the sky with a mixture of Flinders red violet and French ultramarine blue. Cobalt blue was used to block in the background mountains, adding permanent alizarin and a touch of yellow ochre to the closer mountains. The middle ground including trees was blocked in with a mixture of French ultramarine blue, permanent alizarin and yellow ochre. The foreground is the darkest part and so I used  a mix of French ultramarine blue and Van Dyke Brown for the ground and Van Dyke Brown with viridian for the trees. Step 2 The next step was to start giving more form to the relatively abstract underpainting. Using number 10 and 8 flat brushes I started adding more clouds using titanium white mixed with touches of permanent alizarin, lemon yellow and yellow ochre. Dark areas in the clouds were darkened with ultramarine blue, alizarin and raw umber. I gave importance to create contrast between the darkest and brightest parts of the clouds using complementary colors. The distant sky was lightened up using a tint of cerulean blue with lemon yellow added to the left hand side of the painting, the side from where light is coming. The mountains were given more shape by darkening the shadows. The highlights in shadows were painted using a tinted underpaint. The areas lit by the sun on the mountain were painted with a tint of lemon yellow and a touch of permanent alizarin + yellow ochre. Finished painting Mid- and fore-ground A mixture of ultramaine blue and yellow ochre was used to paint most of the ground and trees in the middle-ground. The ground is darker and cooler (with the addition of more ultramarine blue) as you move to the right of the painting since light is coming from the left. Parts of the underpaint was not painted over to give the illusion of shadows, that at that time of the day are very long. The mixture was tinted slightly as one moves into distance. The areas that are hit directly by sunlight where highlighted with the addition of yellow ochre and some lemon yellow in the mid ground. The trees were painted with darker shade of the same color used for the ground. For the foreground used the same base color of ultramarine blue and yellow ochre with the addition of a warmer yellow for the highlights. I used different mixtures cadmium yellow deep, medium and light or/and Australian red gold with sap green, sap green and burnt sienna or permanent alizarin. The details were added gradually over a number of days, thus allowing the previous layer to dry. For most of my painting I used liquol which dries very quickly but for the final highlights and details, paints were used without the addition of any medium. During each session I continued to enforce the dark shadows and adjusting the saturation, hues and values of the highlights.

'Plein Air' painting at Fingal Bay NSW

Above: Fingal Bay NSW

Above: under-painting done on location

Last Sunday was an excellent day to go to the beach and since for the last couple of days I was at Port Stephens, then I headed to Fingal Bay. It was early morning but the day was already hot and so I sat down and prepared my painting kit at a location overlooking the beach at Fingal Bay.

After choosing the scenery I started my underpainting using acrylic paints. Using cobalt blue I drew a very rough sketch consisting of the main shapes in the painting. Then I started putting layers of thin paint while adding more details. Cerulean blue and titanium white were used for the distant part of the sky while cobalt blue was added to the upper part and corners. Titanium white with a touch of alizarin red and raw sienna was used for the cirrus clouds. A mix of titanium white, cobalt blue and touch of raw sienna was used to block the most distant land mass, adding some more blue and alizarin crimson to the mid land mass (Shark Island). The closest land mass was blocked with ultramarine blue, vermilion and yellow ochre. A mix of alizarin and ultramarine blue was used as an underpaint to the sand.

The water was painted using ultramarine blue and touch of raw sienna with white at the background adding more blue to the middle water together with turquoise. More yellow ochre was added to the shallow water closer to the shoreline. The sand was painted using white and yellow ochre plus a touch of burnt sienna.

In the sun the acrylics were drying up in a matter of seconds and so I immediately started adding some more details and highlights to the distant land. The highlights were done by adding white to the base color and then adding naples yellow and touch of orange to the sunlit areas. The vegetation at the closest land mass was done using ultramarine blue, cadmium yellow and red gold. I briefly sketched in three sea gulls that at that time landed on the beach. However the day became too hot and so almost impossible to paint with acrylics. So I decided that I will take the sketch back to the studio to finish it.  I will post the finished work very soon.

Fire and Water - Abstract painting

Acrylic colors used (Atelier and Matisse): 

Alizarin red, cadmium red medium, phtalo blue, ultramarine blue, Naple's yellow, cadmium yellow medium, titanium white 

Brushes:

A normal 2 inch house painting brush, brushes used to apply gesso, a painting knife

Methodology:

This was a very simple abstract I did recently on stretched canvas. I started by placing directly on the canvas ultramarine blue, alizarin and Naple's yellow. Using a 3 different brushes (one for each color) I started spreading the three colors on the canvas mainly at three distinct areas, blue at the bottom right corner, red the upper left and yellow the central to upper right corner. Carefully I started blending the colors together to create the secondaries i.e. green, purple and orange, leaving some areas of pure primary color. I left the colors to dry for couple of minutes  and then I started applying cad red, cad yellow and phtalo blue onto the previous layer using bold brush strokes and applying circling motion depending on how I was seeing the colors developing. I left untouched brush strokes that looked good to the eye or any secondary or tertiary colours that appeared by co-incidence. 

To finish off the painting I took a piece of tissue and placed it in titanium white and I applied it to some areas as a highlight. Using a painting knife I mixed blue, yellow and white and  I applied vertical strokes to the right bottom corner to look like reflections of color.

How to make your own glass palette

Glass palette

During the last couple of years I tried several different kinds of palettes that are available on the markets starting from the traditional wooden ones to the most recent disposable ones. Depending on the situation and where I am painting all types of palettes have their own pros and cons. For example I find disposable palettes convenient because I do not need to clean my palette afterwards, but they are very inconvenient if I am painting in the wind. When I do not have a lot of space where to work and put things around me I usually use a big piece of perspex which fits exactly into my French easel and so I can leave the colors on it ready for the next session or even put in the freezer to be used couple of days after.

Recently I decided to start using a glass palette, that is big in size and that I can take with me when I go to workshops and painting outside. The size of the palette is approximately 55 x 35cm and it is simply made up of a piece of normal glass painting at the back in grey with acrylics. The grey color helps you to see the colors much better since it reduces reflections. From the local store I bought the wood and piano hinges I required to build the wooden case myself. I then fitted this piece of glass into a home-made wooden box which I can close and lock when it is not in use and during transport. When open I can place the whole box on the drawer of my French easel. The open lids serve as small side tables on which I can place my colors, mixing media and brushes. I also fitted a wooden brush holder on the side.

When ready I simply transfer all the brushes into my French easel, place colors in their box and clean the mixing surface with a clean tissue or cloth. Being made up of glass makes it very easy to clean. The advantage of a big palette is a larger mixing area as well as enough space to place your colors around. I always place my colors in the same order as they are on the color wheel, that is reds on my left, blues on my right and yellows in front of me.

For more information about this easel please do not hesitate to ask or contact me.