Fingal Bay - the finished painting

Fingal Bay - NSW

In my last post I showed how I did the underpainting of this artwork using acrylics, on location. Using acrylics while on location has its own advantages and disadvantages. An advantage is that you can easily carry the painting with you while travelling because it dries quickly and so you can place it anywhere you like. On the other hand, if working in very warm conditions, excessive fast drying can be a disadvantage during the painting process itself.

So back to the studio I decided to finish this painting in oils. You can always work with oils over acrylics but not the other way round. I started from the sky, using cerulean blue and white with a  touch of alizarin crimson and raw sienna to the distant sky. I darkened the sky as I moved forward adding cobalt blue and alizarin to the right hand side corner and white and a touch of viridian to the left hand side corner from where the light is coming.

The distant land on the left was blocked with cerulean blue and highlights with raw sienna and white. The middle ground was blocked with cobalt and alizarin while the closest and mass on the right was blocked with ultramarine blue and alizarin with touch of yellow ochre to gray it. 

For the distant water I used ultramarine and phthalo blue and phthalo green, adding yellow and Australian red gold to the shallow water on the front. The detailes of the tress where painted using ultramarine blue mixed with yellow and a mixture of burnt sienna, viridian and Australian red gold. I added two sailing boats to the distance to cut the horizontal shoreline of Sharks Island in the distance. The wet sand on the fron was painted with yellow ochre mixed with burnt sienna and cerulean blue.

'Plein Air' painting at Fingal Bay NSW

Above: Fingal Bay NSW

Above: under-painting done on location

Last Sunday was an excellent day to go to the beach and since for the last couple of days I was at Port Stephens, then I headed to Fingal Bay. It was early morning but the day was already hot and so I sat down and prepared my painting kit at a location overlooking the beach at Fingal Bay.

After choosing the scenery I started my underpainting using acrylic paints. Using cobalt blue I drew a very rough sketch consisting of the main shapes in the painting. Then I started putting layers of thin paint while adding more details. Cerulean blue and titanium white were used for the distant part of the sky while cobalt blue was added to the upper part and corners. Titanium white with a touch of alizarin red and raw sienna was used for the cirrus clouds. A mix of titanium white, cobalt blue and touch of raw sienna was used to block the most distant land mass, adding some more blue and alizarin crimson to the mid land mass (Shark Island). The closest land mass was blocked with ultramarine blue, vermilion and yellow ochre. A mix of alizarin and ultramarine blue was used as an underpaint to the sand.

The water was painted using ultramarine blue and touch of raw sienna with white at the background adding more blue to the middle water together with turquoise. More yellow ochre was added to the shallow water closer to the shoreline. The sand was painted using white and yellow ochre plus a touch of burnt sienna.

In the sun the acrylics were drying up in a matter of seconds and so I immediately started adding some more details and highlights to the distant land. The highlights were done by adding white to the base color and then adding naples yellow and touch of orange to the sunlit areas. The vegetation at the closest land mass was done using ultramarine blue, cadmium yellow and red gold. I briefly sketched in three sea gulls that at that time landed on the beach. However the day became too hot and so almost impossible to paint with acrylics. So I decided that I will take the sketch back to the studio to finish it.  I will post the finished work very soon.

Fire and Water - Abstract painting

Acrylic colors used (Atelier and Matisse): 

Alizarin red, cadmium red medium, phtalo blue, ultramarine blue, Naple's yellow, cadmium yellow medium, titanium white 

Brushes:

A normal 2 inch house painting brush, brushes used to apply gesso, a painting knife

Methodology:

This was a very simple abstract I did recently on stretched canvas. I started by placing directly on the canvas ultramarine blue, alizarin and Naple's yellow. Using a 3 different brushes (one for each color) I started spreading the three colors on the canvas mainly at three distinct areas, blue at the bottom right corner, red the upper left and yellow the central to upper right corner. Carefully I started blending the colors together to create the secondaries i.e. green, purple and orange, leaving some areas of pure primary color. I left the colors to dry for couple of minutes  and then I started applying cad red, cad yellow and phtalo blue onto the previous layer using bold brush strokes and applying circling motion depending on how I was seeing the colors developing. I left untouched brush strokes that looked good to the eye or any secondary or tertiary colours that appeared by co-incidence. 

To finish off the painting I took a piece of tissue and placed it in titanium white and I applied it to some areas as a highlight. Using a painting knife I mixed blue, yellow and white and  I applied vertical strokes to the right bottom corner to look like reflections of color.

How to make your own glass palette

Glass palette

During the last couple of years I tried several different kinds of palettes that are available on the markets starting from the traditional wooden ones to the most recent disposable ones. Depending on the situation and where I am painting all types of palettes have their own pros and cons. For example I find disposable palettes convenient because I do not need to clean my palette afterwards, but they are very inconvenient if I am painting in the wind. When I do not have a lot of space where to work and put things around me I usually use a big piece of perspex which fits exactly into my French easel and so I can leave the colors on it ready for the next session or even put in the freezer to be used couple of days after.

Recently I decided to start using a glass palette, that is big in size and that I can take with me when I go to workshops and painting outside. The size of the palette is approximately 55 x 35cm and it is simply made up of a piece of normal glass painting at the back in grey with acrylics. The grey color helps you to see the colors much better since it reduces reflections. From the local store I bought the wood and piano hinges I required to build the wooden case myself. I then fitted this piece of glass into a home-made wooden box which I can close and lock when it is not in use and during transport. When open I can place the whole box on the drawer of my French easel. The open lids serve as small side tables on which I can place my colors, mixing media and brushes. I also fitted a wooden brush holder on the side.

When ready I simply transfer all the brushes into my French easel, place colors in their box and clean the mixing surface with a clean tissue or cloth. Being made up of glass makes it very easy to clean. The advantage of a big palette is a larger mixing area as well as enough space to place your colors around. I always place my colors in the same order as they are on the color wheel, that is reds on my left, blues on my right and yellows in front of me.

For more information about this easel please do not hesitate to ask or contact me.

Oil painting - Near Warrenbungles

This is an oil on canvas I finished a week ago. The original photo was taken while on my way to Lightning Ridge and I was driving on a road crossing through the Warrenbungles National Park. 

The sky was painted using titanium white and raw sienna for the lower part and cerulean blue for the top and closer sky.

A mix of cobalt blue and permanent rose was used as an underpainting for the mountains (adding more titanium white to the distant mountain). The same mix was used to under-paint the mid-ground. Underpainting of the mid-ground trees was done using a darker mix by adding more cobalt blue and rose. The underpaint of the front three and ground was painted using a mix of ultramarine blue and burnt sienna.

Highlights on the mountain were done by adding white to the underpaint plus addition of lemon yellow for the side facing the sun. The same was done for the highlights on the trees to which I added raw sienna and cadmium orange.

The ground in the distance was painted using a flat brush and horizontal brush strokes with white, cadmium orange, lemon yellow and a touch of viridian.

As moving towards the foreground more viridian and yellow ochre were added for the ground. The grass at the front was painted witha painting knife using cadmium yellow, viridan and Australian red gold.

Highlights on the front tree were painted with cadmium yellow mixes with ultramarine blue and white. Details such as house and cows were added later on.

Misty Gum Trees

Original Photo

Misty Gums, Oil on Canvas, 45 x 90cm

This is a painting I did some time ago from a photo I took of gum trees on the Murray river banks. The photo is a little bit dull and boring and so I wanted to create a vibrant painting out of it. For the composition I only used the four main gum trees and the setup next to the river in order to create reflections in the water. 

When coming to decide the colour scheme of this painting I chose the majority of my colours from the warm side of the colour wheel starting from yellow to red. Then I used two complements, ultaramarine blue (for the shadows) and green. 

I started by creating a gradient of colours in the background. Using a two inch house painting brush and a vertical brush stroke I applied titanium white to the right hand side of the canvas. From white I went to yellow, using raw sienna which when mixed with white gives a very bright background yellow. The next colour was vermillion to burnt sienna on the sides. Using vertical brush strokes I blended the colours to create a gradient. 

Using a mixture of burnt sienna and ultramarine blue I blocked in the darkest trees, river bank and water reflections. For the water reflections I initially used a vertical brush stroke, followed by a horizontal one to create a water effect. 

The background trees were painted using a vertical brush stroke, bottom to top with various values of vermillion mixed with burnt sienna. White and raw sienna was used for highlights. The highlights on the front trees were added using a painting knife and mixes of white with Naples yellow and vermillion. Water ripples were also added using pallette knife and a mixture of white and ultramarine blue. Grass on the river bank was painted using cadmium yellow light and ultramarine. Same colour tinted with white was used for foliage, together with cadmium yellow light and cadmium red medium.

Hanging Rock

This is an oil painting of hanging rock in Blue Mountains National Park.

I used two sets of colours, pallette 1 for the background and pallette 2 for the foreground.

Pallette 1: Titanium White, Cobalt blue, permanent crimson, raw sienna, manganese blue.

Pallette 2: Pilbara red, ultramarine blue, burnt sienna, Payne's grey, cadmium yellow medium

Step 1

Step 1

First I did a basic sketch using willow charcoal. Using a very diluted mixture of colour in odourless spirit, the upper part of the sky was painted with manganese blue and titanium white. Raw sienna was used for the yellowish part of the sky. An underpainting of the background mountains was done using cobalt blue and white, adding more blue and permanent crimson as I moved forward.

Step 2

Step 2

I blocked the main rock using a wash of burnt sienna and Payne's grey for the darkest shadows. I left the painting to dry overnight.

Step 3

Step 3

During this stage I add more detail and mid-tone colours. Clouds where painted using a mix of cobalt blue and crimson with white. The background cliffs where painted using white with a touch of cobalt blue and permanent crimson for the furthest ones. As I moved forward I eliminated the blue and added more crimson and also a touch of burnt sienna to the closest cliffs. 

Grass on the furthest cliffs was painted using raw sienna, white and a touch of sap green. The trees become greener as they come closer. 

The main rock formation was further developed using ultramarine blue, burnt sienna and Payne's grey.

Trees on the rock formation were blocked using ultramarine blue/vermillion, tinting it with white as moving backwards.

Step 4:

Step 4

More details and highlighting were added. At this stage I usually start from the main subject and then move to the less important parts and background. Pilbara red, cad yellow and vermillion were used for the main rock, creating texture using a painting knife. Highlights on the rock were done using white and Australian red gold. I then added highlights to the trees using cadmium yellow and Australian red gold, adding white as I moved to the background.

Painting with acrylics and oils

Today I am writing about a recent painting I finished of another Australian landscape.

I started this painting from the above reference photo, which I took while vacationing at snowy mountains very close to Thredbo, almost two years ago. This photo has very nice background mountains but the foreground is not that inspiring. However I decided to keep the basic shapes while modifying the colour scheme and adding gum trees to the foreground. Using charcoal I did a rough sketch of the main forms to define the background, middle and foreground. I added a farmhouse at the far end of the middle ground.

I started the painting by executing an underpainting with acrylic colours to establish the basic forms as well as the mood of the painting.

I decided to paint an early morning scene and so I chose a pallette of warm oranges and yellows and cool blues for the background. I then removing some trees and the road that was originally winding uphill in distance. The advantage of using an acrylic underpainting is that it dries very quickly although you can achieve the same result if you had to dilute oils with mineral spirit.

Next step was to go for a layer of oil colour to enforce the shadows and mid-tones in the painting. Colours used were titanium/zinc white, cobalt blue, ultramarine blue, alizarin crimson, cerulean blue, yellow ochre, cad orange, burnt sienna, Australian red gold, virmillion, burnt umber, sap green, viridian,cad yellow light.

The final stage was to add the details and highlights, using both brushes and pallette knives. The final product can be seen above.

Afternoon ride

This is an acrylic on loose canvas showing a horse rider on top of a hill. Using willow charcoal I did a rough sketch of the main elements of this painting.

A mixture of titanium white with rose madder and cobalt blue was used to underpaint the furthest hill. A second mixture was prepared consisting of ultramarine blue, vermillion and white for the other background hills, increasing blue and vermillion to darken the colour as I moved forward to the closer hills. The foreground including trees were painted with viridian and burnt umber mix. Trees in the mid-ground were blocked by adding cobalt blue mixture to the foreground mixture, increasing blue as I went to the background trees.

After drying I prepared a wash of naples yellow with white for the background using diagonal brush strokes. I added trees using the same background blue colour. I started to add more details to the trees using raw sienna and yellow ochre. Light is coming from the right hand side corner.

Using a mix of yellow ochre or Naples yellow ith white I continued adding highlights to the trees and as I approached the front part of the painting I starting adding washes of alizarin red, red gold and viridian. Warm colours like vermillion, touch of cad red medium, cad yellow and ultramarine blue were used for the front trees and grasses. Then I highlighted the horse with combination of burnt sienna, cad orange and yellow/white mix. 

Additional details were added such as tree trunks and pure colours for highlights.

Waterfall painting

This painting shows one of the waterfalls found on one of the tracks in Blue Mountains. My favorite bush walks are those deep in the rainforests surrounded by ferns and where light seldom reaches. Waterfalls, creek and small rock pools continue to enhance the landscape. This is what inspires me most, the effect of light, water and water reflections.

This painting is an acrylic on canvas. I used a technique which is more impressionistic since it lacks the fine details of realism. I light source is coming from the right upper corner. I started by a simple wash of the main colours as an underpainting, using titanium white and Naples yellow for the lighting. Cerulean blue and white was used for the distant rock underpainting adding raw sienna to it to create tints of green for the vegetation. A mix of ultramarine blue, white and vermilion was used for the underpainting of the main rock for the waterfall, adding more blue and red to darken it as I moved closer to the front. Using the same colours plus burnt sienna and burnt umber I pained the foreground using horizontal brush strokes.

After drying I added more layers of paint to the light source and to the background rocks by mixing white with touches of alizarin red and burnt sienna to create the rocks. I added more details and colour to the vegetation by using a mixture of Naples yellow, cerulean blue and olive green for the mid-tones. I added highlights with increasing amounts of white and Naples yellow, using a dabbing stroke of a flat brush.

With dry brush I scrubbled the mist below the vegetation using a mixture of white and cobalt blue.

The vegetation on the left hand corner was painted using a mixture of greens darkened by its complementary colour alizarin red.

Then I started adding details to the rock. Using a pallette knife as well as brush I started adding mid-tones using a mixture of white, alizarin red and burnt sienna. The closer to the front of the painting the more burnt sienna was used. After drying I started adding highlights using white and naples yellow to the rock. I also prepared a wash of phtalo green with raw sienna and Naples yellow and with very soft touches I started adding some green colour to the rocks. Using the same wash that I used for the mist, I added some mist to the back part of the rock.

Using the same mixes of greens and burnt sienna I strted adding reflections to the ground, using horizontal brush strokes. The water was done using dry brushes with mixtures of white plus cobalt blue. Highlights with white and Naples yellow using a very small (0) round brush and intermittent brush strokes.

A wash of white and cobalt blue was used to give the impression of water on the ground. I then added different greens a mixture of yellows and red gold to add some vegetation to the rocks especially to the front part of the painting.

Happy New Year to everyone.

This is one of the many acrylic paintings that I did last month. It shows a view of Ormiston Gorge a very nice place to visit in central Australia. I was there in August 2012 and this particular place is one of my favorites. To the original photo I added the gum tree at the front. I love to paint gum trees especially those having white bark. 

I used a very loose and fast painting technique, bearing in mind that acrylic colours dry too quickly sometimes while still on the brush. I used cooler colours for the background, like alizarin red, cobalt blue, raw sienna with lots of white. Warmer and stronger colours were used for the front, including burnt sienna, vermillion, cad yellow medium and viridian. For the greenish colour of the pool I used olive green (or sap green).